3DSAND&BALLS

3D SAND GEEFT EEN MATTE UITSTRALING AAN UW WERK.

Meng 3D Sand altijd met een medium. Hetzij Powertex of een acrylbinder. Je kan het ook mengen met Easycoat mat of glossy. Eens gemengd, kan je het met een paletmes of penseel aanbrengen op doek. Wil je een extra mat effect, strooi er dan nog Sand op en verwijder het overtollige als alles opgedroogd is. Je kan ook Powertex uitsmeren en het 3DSand rechtstreeks in de natte powertex strooien. Je kan 3D Sand perfect mengen met Easy structure voor een “heavy structure”. Opgelet alles droogt veel sneller als je Sand toevoegt. Probeer het zeker ook met Easy3DFlex maar enkel en alleen als je minder craquelé wil. Door toevoeging van Sand krijgt al jouw Artwork een matte uitstraling.
Volg deze stappen voor een optimale hechting

VOLGORDE IN GEBRUIK VAN 3DBALLS

  1. Smeer met een groot palletmes een grondlaag Powertex uit op jouw doek. Gebruik allerlei producten om meer structuur, kleur en een compositie aan te brengen. Probeer de Balls altijd in een eindfase van een schilderij toe te voegen, dat is makkelijker. eens de grote balletjes erop liggen, kan je nog moeilijk met een palletmes werken.
  2. Als je een schilderij wil maken waarin je alles van Sand&Balls gebruikt, van small tot large, begin dan altijd met de grootste balletjes in de natte Powertex te strooien. Strooi dan de medium balletjes in de natte Powertex, nadien de small en dan pas het 3DSand. Spray hierover verschillende bister kleurtjes of LiquidPower. Deze vloeistoffen worden gedeeltelijk geabsorbeerd door de balletjes en het zand. Je zal versteld staan van het prachtige resultaat.
  3. Tik onderaan jouw doek (als op een trommel) om het Sand en de balletjes beter te laten hechten.

 

3D SAND GIVES A MAT APPEARANCE TO YOUR ARTWORK.

Always mix 3D Sand with a medium. Either Powertex or an acrylic binder. You can also mix it with Easycoat mat or glossy. Once mixed, you can apply it to yourcanvas with a palette knife or brush. If you want an extra matte effect, sprinkle Sand on it and remove the excess when everything has dried. You can also sprinkle the 3D Sand directly into the wet Powertex. You can perfectly mix 3D Sand with Easy structure for a “heavy structure”. Please note that everything dries much faster if you add sand. Be sure to try it with Easy3DFlex, but only if you want less crackle. By adding Sand, all your Artwork gets a matte appearance.

Follow these steps for best adhesion:
Sequence of 3d balls
Spread a prime coat on your canvas with Powertex using a large pallet knife. Create structure, color, and composition with all kind of products. Add the 3D Balls in the final phase of a painting, that is easier. It is difficult to work with a pallet knife, once the large 3D balls are added. If you want to make a painting with 3D Sand & Balls, always start by sprinkling the largest balls in the wet Powertex. Then the medium size balls, the small ones and only then the 3D Sand. . Spray different colors of bister or Liquid Power on it. These liquids will get partially absorbed by the balls and the sand. You will be amazed by the beautiful result. Tap the bottom of your canvas (like on a drum) to make the Sand and the balls adhere better.

 

3D SAND&BALLs

Mélanger toujours le sable 3D avec un médium comme le Powertex ou avec un liant acrylique. De même qu’il est possible de l’incorporer à l’Easycoat mat ou brillant. Utiliser ce mélange sur la toile à l’aide d’un couteau à peindre ou d’un pinceau. Pour un effet extra mat, saupoudrer le sable par dessus et retirer l’excédent lorsque tout est sec. De plus, on peut étaler du Powertex et saupoudrer le 3DSand directement dans celui-ci humide. Pour obtenir une « structure plus lourde » mélanger le sable 3D avec l’Easy structure. En rajoutant du sable aux réalisations, elles sèchent beaucoup plus rapidement, par contre si l’on l’utilise avec l’Easy3DFlex, on obtient moins de craquelures. Son utilisation assure un aspect mat à vos ouvrages.

 

3D BALLS

METHODE A SUIVRE POUR UNE ADHESION OPTIMALE

  1. Étaler sur votre toile un apprêt de Powertex avec une spatule XL. Additionner toutes sortes de matières (sable, pâte, poudre, pigments, bistre, etc.…) pour accentuer la structure et la couleur dans une composition. Essayer toujours d’intégrer les boules dans la phase finale de la peinture, c’est plus facile. Lorsque les plus grosses boules sont en surface, c’est plus difficile de travailler ensuite avec une spatule.
  2. Dès lors que l’on souhaite utiliser toute la gamme des 3dballs et le sable sur une toile, il faut commencer par disperser les plus grosses 3Dballs et faire par ordre dégressif dans le Powertex humide bien sure, et pour finir parsemer le 3dsable. Vaporiser différentes couleurs de bistre ou de LiquidPower par dessus, elles seront partiellement absorbées par les billes et le sable. Le résultat est bluffant.
  3. Poser délicatement un linge sur votre composition, et avec le plat de la main pressé dessus afin de faire adhérer le sable et les boules, le soulever avec minutie, afin qu’aucune boule ne suive.